3D Project: Wood Workshop Process

my wood working in the workshop 

Wood Workshop 

 

Firstly, i got a 6mm wood and I start to draw the base the side and the windows as well with HB pencil.

This is after i draw it in the wood. and i started to cut them out from the big piece.

I then used this machine to cut them off out of the wood with the health and safety instruction .

after I cut them I used the other machine to cut the windows off. to cut the windows, I made a hole first using the drill then i used the machine to cut it as it shown in the picture.

After i cut the windows i sand each piece using the sander to have a neat sides and edges 

after i finished sanding them, i start sanding the inside of the window and Because i cant sand the windows with the big machine I used the tools to sand the small pieces.

and this is the final outcome after cutting, and sanding the wood

Using the wood workshop was not easy at the beginning, but with some help of how to use the machines in the right way it become to be much easier, and one of the things that i have learned is how to measure what i need to cut and from which place i need to start on the machine where i used a big metal to hold the wood which it prevents the wood from moving, so the results turns out to be more correct with more accurate measurements. However the results were not bad for the first time, but need more work so I tried the sander to get clean edges and better look.