2D Process: Floor Plan- Cohoom

 

Firstly, before I start my design and checked if the doors are equal to double check, from the white boxes I changed it to 5.437 in both side so it can be equal, and then I did the same for both doors.

I then started to change the floor colour. To do that i clicked on the floor that i need to change then on floor editor.

I then chose the floor that i want which beige marble after O put it I clicked twice on the floor and the settings of the floor has opened for me in the left. From the "Gap" section i changed the floor from false gap to true gap. I then did the same thing for the other rooms.

I added window for the showcase are. I typed windows in the search section in the left then I chose one. After that I changed the height to 4m and the thickness to 0.14m.

Here I added the lift I changed the length to 2.701m, width to 2.499, height to 7.896. The height will be changed when add the 2 floors.

Same here I added the staircase and I changed the length to 5.018, width to 1.966, and height to 4.69.

Lastly I changed the wall colour. To do this I clicked on the wall then on wall editor (same as the floor), then I chose the material that i need. after that I clicked on the wall twice and the left settings opened for me. I changed he gap to 0 and the custom colour to white ( to change the colour I clicked on the two arrows down where I put yellow marker in and then I changed the colour to what I want.